Zing Ear TP-05 Wiring Instructions

Zing Ear TP-05 with 4 Wires

Before You Start:

  • Turn off electrical current at source by switching off circuit breakers.
  • Failure to disconnect power supply to the lamp or lighting system may cause electrical shock, fire hazard, severe injuries or death.

TP-05 Touch Lamp Control Wiring Diagram:

TP-05 Wiring Simulation:

Useful Links:

  • Click here to contact us.
  • Click here to purchase this touch lamp switch.

Zing Ear ZE-268s2 Wiring Instructions

Zing Ear ZE-268s2 Brass Finish
  • Turn off electrical current at source by turning off circuit breakers
  • Do not cut wires, multi-strand wires are solid and soldered together so they can be attached to the switch

Steps:

  1. Note the color of each wire and the terminal number to which they are connected
  2. Remove wires from the old switch
  3. Make sure that the wire lead length is the same length as the line beside word “STRIP”
  4. Insert wires into the new switch as in the previous switch (see step 1)
    Wires should be inserted into the slots on side of the switch not the holes on surface.

Color Codes For Ceiling Fans (Your Fan Wires Color & Position May Vary)

  • Aloha Breeze ceiling fan: L=Orange, 1=Yellow, 2=Purple, 3=Black (power)
  • Hampton Bay ceiling fan: L=Yellow, 1=Grey, 2=Brown, 3=Black (power)
  • L=Red, 1=Black (connected to capacitor), 2=Blue, 3=Black (power)
  • L=Purple, 3=Black (power), 2=Brown, 1=Grey

Switch Wiring Based on Capacitor Connection (Your Capacitor configuration May Vary)

The capacitor has three wires with two μF readings. The two wires on one end of the capacitor are attached to terminal 1, and 2 on the switch.

  • L= Attach to reverse switch
  • 3= Black wire (Power)
  • 2= Larger/higher reading from the capacitor
  • 1= Smaller/lower reading from the capacitor

Useful Links:

  • Click here to contact us.
  • Click here to purchase this fan switch.

Zing Ear MW-201 Ceiling Fan Wall Control Wiring Diagram

mw-201 ceiling fan wall control with on off light switch

Before You Start:

  • Turn off electrical current at source by switching off circuit breakers.
  • Failure to disconnect the power supply may cause electrical shock, fire hazard, severe injuries or death.

Wiring Notes:

  • If the fan has a light kit, connect blue wire from fan wall control to blue wire (fan light wire) from wall
  • If the fan does not have a light kit, then 2 wires are needed not 3.

mw-201 ceiling fan wall control with on off light switch wiring instructions

 

Useful Links:

  • Click here to contact us.
  • Click here to purchase this ceiling fan wall control switch.

Zing Ear ZE-208s5-1T Wiring Instructions

Zing Ear ZE-208s5-1T Nickel Finish

Before you start:

  • Turn off the power supply to the ceiling fan
  • Proceeding to replace the switch without disconnecting the power may cause electrical shock, fire hazard, serious injury, or death

Steps:

zing ear ze-208s5-1t wiring diagram

  1. Write down the color of each wire and the terminal number to which they are attached
  2. Remove wires from the old ceiling fan. If wires are hard to remove, insert a paper clip into each hole (numbered 1, 2, 3, 4, L) and pull the wire out
  3. Make sure that the wire lead length is the same length as the line beside word “STRIP”
  4. insert the wires as noted in step 1
    Wires should be inserted into the slots on side of the switch not the holes on surface.

Useful Links:

  • Click here to contact us
  • Click here to purchase this fan switch

CEILINGFANSWITCH.COM

Niagara Falls, New York
Mon-Fri 10AM-4PM Eastern
contact@CeilingFanSwitch.com
1-815-486-1022

DISCLAIMER

All product names, logos, brands and/or other trademarks on our website are the property of their respective owners. They are used to simplify the identification of the proper replacement parts. None of the companies or trademarks affiliated with, endorse or sponsor us or our products